/u/bobsaget69420 thanks for the shoutout! All you guys are truly the best and its a life pleasure.
That Misby jams especially in regards to surface area.
/u/CrocodileDundee stellar post my fellow! RR never lets me down but I gotta say neither do you and the others in your knowledge bombs.
I think I been cutting my product dry time short on the warmer. I keep mine set usually 130 and bump up as needed and I to stick to the 170 range. I just never leave it that long and I got good patience.
Gonna try that out now on some new that just landed.
I've gotta stop reading these.... I shed a little tear🥲, as I never got any movement from the pack sucked into the ⚫black hole. I will say though, RUSH is standout dude, while we waited the proper time for movement, XMR sent some ships🚀 to the moon🌑, and RUSH went over and beyond and split the gains with me, making me pretty much whole and out nothing.......... I was in a tight spot and getting that back was huge. This pack was gonna be the last hurrah! for a bit.... so still hard to *read your great reviews.
We packed some cheese, a mango slush,
Then launched ourselves in cosmic rush.
No plan, no map, just vibes and dip—
We YOLO’d in our rocketship.
“This is,” we screamed, “our last hurrah!”
Then someone sneezed—we changed our yaw.
We spun, we flipped, we lost control...
And flew ass-first into a blackhole.
FUCK stronger than the 1W? I just recently received my order for it and have barely made a dent. And now you got me feeling buyer's remorse that I should've waited for the 1X. Is it that much better? Your review has me debating if I should just offload what I have left of the 1W and place a new order.
Maybe its just my personality but I feel like I get drug FOMO reading reviews for products lol
I wouldn't even think of it like that, labs are going out shortly and it could be better sleep too, you need dopamine to get the DAT response, so that's why I always say it's always better to wait for labs.
awesome review, one question though. how mandatory is it to do things like heating it and hotplating it. i always just used a spare phone screen, does not heating it leave solvents that will cause brain damage or something or am i overthinking it and thats all just to make it more pleasant to insufflate. thanks for the review!
I do, because things like chloroform, benzene, and hexane are very toxic and or carcinogenic and it's truly hard to know what is in each batch, so it's just an additional precaution to avoid any potential complications down the road. For instance, if I can smell toluene, I will go more to 200F for 30 mins to remove as much as possible, and it compromises the Tropacocaine, I am typically am ok with the tradeoff. But I typically never have nose bleeds or sinus infections as a result, so it's been my go to.
Things like acetone aren't considered toxic, which is why it's widely used in nail salons, but you don't want that going up the nose if you can avoid it.
Here's a guide on solvents from least to most toxic.
Sorry if this is a stupid question, but I see diethyl ether is listed in 'undesirable', even though I know Machiaveli's ether-washed is praised to be some of the best in the US. What's the problem with ether, and is Machiaveli's actually good or is it 'undesirable'?
Not a stupid question at all, you have to remember diethyl ether is basically starting fluid.
Accordingly, it has a super low flash point -45 °C; and an auto-combustion at 320°F, so extremely volatile, think back to when Richard Pryor torched himself trying to use freebase ether.
Mach always says, you have to hotplate his listings thoroughly, because it can linger.
It's not carcinogenic, or anything like that, but it's super flamable, so handle with care.
No taking bumps off a hot tray doesn't burn I will spare you a novel but, it stems from "Newton’s Law of Cooling."
Most salts are poor thermal conductors, the larger the area of disbursement and a smaller the particle size the quicker the particles reach ambient temperature. So in practical terms, because the particles are so small, and the substance doesn't conduct heat well, it will reach ambient temperature within seconds, which is why you don't need to worry about getting burned.
Moreover, based on current research and forensic stability studies, coke-hcl remains relatively stable at around 140°F-170°F for short duration, such as 30 minutes. Again, since its melting point is approximately 384°F that's typically where direct degradation typically begins near or just above this temperature.
Studies conducted on behalf of "Cheng et al., 2000; Zhou et al., 2011" indicate that minor degradation products can begin forming at temperatures exceeding 104°F after several months, with more significant impurity formation occurring at 120°F–140°F over the course of weeks to months. Therefore, heating cocaine to 140°F-170°F and then cooling rapidly results in minimal to no degradation because the temperature never comes close to exceeding its stability threshold and the quick cooling enhanced by the large surface area effectively prevents significant breakdown.
Keep in mind, I have accidentally melted blow before leaving it too long in the oven at 275°F, so now anytime I give a recommendation, I am typically going through a research paper or two so that no one else does the same lol.
exactly, basically I keep chopping and scraping until the white no longer sticks the metal card and it insufflates super clean, let me know how it goes!
typically try to chop to fine dust before hand, and then drop on the face of the hotplate itself after 5 mins or so use a metal card to grind directly on hotplate, if it sticks to the metal card, scrape off and let it sit for another 5 mins. Once the dust completely falls off the card unassisted, then transfer to a bullet or dram bottle with a seal topper to keep moisture out...
I love glass vials of coke lol. I will try this soon. I need to buy a mug warmer. I misplaced one so have been using the microwave to warm a plate. You know your chemistry and science shit.
Personally I think Walter White of Coke would be a cooler name then the professor. Sorry lol just thought of this and wanted to let it out
Does cocaine HCl melt before decomposing or not? I have yet to find a source giving a direct answer. And if it burns/oxidizes, does it decompose before melting under vacuum?
From what I have read, it starts to degrade at >140F after about 2 weeks to 2 months, chinese forensic lab is the one that published that journal, can't think of the exact name off the top of my head.
Also, another aspect was via heat alone, it fully degrades at its melting point, I will have to double check, but was reading a publication a few weeks back that alluded to that.
I hear a lot about this being the best out there. I don't doubt it, but what I'm wondering is it really worth 3× more than other vendors who have 90% +? I don't understand how that's possible.