Torhoo onion mirror : torhoocc3yugradvhrppml2fin4xob7kgg7uf42s4xk7p6r5vzy62ead.onion

We'll be back on other markets soon : Archetyp | Torhoo darknet markets

We're DealerJack, some buyers might know us for our high quality Ketamine Rocks and needles, We're still around and will be setting up shop on other markets soon to bring high quality products to the community.
We hope to see many new and returning faces, Stay safe.
Cheers

/u/jadelisterine2025

2 points

2 months ago

I’ve done this many times. The process is simple: first, you buy acetone and make it anhydrous by drying it with Epsom salt. Finely chop your powder, then add about 10–15 mL of acetone per gram. Swirl the mixture for 1–2 minutes, and either let it sit for 15 minutes or, depending on preference, soak it for up to 30 minutes. After that, set up a lab filter in a funnel and pour the mixture through it. The filtered liquid (acetone) will carry away the cuts, while your powder will remain in the funnel. Finally, allow the filtered powder to dry completely for 24–48 hours

/u/yollolollo 📢

2 points

2 months ago

how about materials, containers etc?

/u/jadelisterine2025

1 points

2 months ago

All you need is 2 beakers(pyrex or anything), lab filter (you can use coffee filter if no lab filter available), acetone and a glass rod to stir the solution.

/u/jadelisterine2025

1 points

2 months ago

Please don't stir it with a finger

/u/jadelisterine2025

1 points

2 months ago

Make sure your acetone is cold — you'll lose less product that way. If you want to skip drying with Epsom salt, you can just buy Klean Strip Acetone from Home Depot — it's good quality. The original OG who shared this method with the community used Klean Strip whenever he didn’t feel like drying it himself. Also, remember: cocaine does not dissolve in acetone; it stays in the filter. It's the liquid (acetone with dissolved cuts) that you need to throw away.

/u/jadelisterine2025

1 points

2 months ago

Once you’ve mastered the acetone wash, come back — I'll show you more techniques. With a proper multi-step purification process, you can reach around 97% purity at home.

/u/jadelisterine2025

2 points

2 months ago

Final step — don’t forget to evaporate the leftover acetone from the beaker and send those cuts back to the vendor.

/u/mollyroger

1 points

2 months ago

haha, nice touch! XD

/u/[deleted]

1 points

2 months ago

Its super easy your missing the bit about slow heat, but tbh acetone nowadays takes fuck all cuts out. Esp as the coke is such high quality ATM.
You need to do a full wash if you want to get completely clean coke. Thats Mercgrade shit.

/u/deathonator

0 points

2 months ago

this is a dumb question but would you happen to have a video of this?

/u/jadelisterine2025

5 points

2 months ago

Yeah I have one with my ID and my face on it

/u/mburns P Owner of Springfield Nuclear

2 points

2 months ago

from /u/walter499, not 999 :).

/post/ed826fb7542bed06ed9e

/u/jadelisterine2025

1 points

2 months ago

That guide makes it sound like rocket science, but it's actually a very simple process.

/u/mburns P Owner of Springfield Nuclear

2 points

2 months ago

That's why it's best if you show the video with your id and face :).

But he asked for walts guide, that's walts guide.

/u/yollolollo 📢

1 points

2 months ago

Walt's guide is really top notch but hard to get from a noob like me. Lots of useful info you did not mention but confusing.

/u/yollolollo 📢

1 points

2 months ago

yh my bad, I miss my teacher

/u/BeefThom SO SAYETH da BEEFLORD: RIPWalt

1 points

2 months ago

Thank you

/u/Osmosis_Vanderwaal

2 points

2 months ago

Lots of good information here and a little bad information. Did youb know you could type "the cocaine handbook. David Lee Phd free download" in your search engine and download a free pdf from at least a dozen different places. Read that and you will know moe about cocaine than anyone you know He covers the acetone wash in there, rerocking, wow to stack flaked so it looks like it's straight from bolivia, a/b extractions, different classes of adulterants. The book is old, it's not up to date as far as adulterants and such, but there's a lot of information that will never change.
Acetone is a good all-ariound solvent to wash cocaine in. It's minimally soluble in acetone. Acetones special abilities are dissolvig fatrs oils and sugars, so ig your cocaine happens to be cut with mannitol orn baby formula or pwdered milk, acetone works very well. There are many other solvents avauilable that are good at dissolving other adulterants also Heptane, ethyl ether, diethyl ether, and chloroform are a few other easy to procure solvents. Heptane and diethyl either from engine starting fluid and chloroform from bleach and aceton haloform reaction.
Don't try to use fingernail polish remover. 10 years ago it was a good source of acetone but all of the manufacturers were pushed by the government to add a bitterant to fingernail polish remover (denitonium benzoate, bittrex) so "chilren and animals" wouldn't drink it (eyeroll) but it tastes like shit

/u/fermentedshrimp P

1 points

2 months ago

Interesting.. will read the PDF. haha, paperback version second hand €500. They should publish a re-issue!

/u/Osmosis_Vanderwaal

1 points

2 months ago

the method he uses to rebrick cocaine is the best I've ever read by 100 miles and his method for an acetone wash kicks ass, look at this stuff, I wish I could get shit like this on the dnms. So clean that it's crystals. If this shows you all of the pictures in that group, theres one under UV light, that flouresces blue. In an issue of Tetrahedron on erowid, A DEA chemist says that cocaine hcl flouresces if it's over 85% pure. Nobody who's stuff I've got off the markets has done that, and I do always check. Not even the "lab tested 93%" did
http://bbzzzsvqcrqtki6umym6itiixfhni37ybtt7mkbjyxn2pgllzxf2qgyd.onion/attachments/qx6wwsojcd-jpg.49439/
This is the flourescent pic, someone stole this pic and claimed it as their own and licensed it less than 30 minutes after I posted it :/
http://bbzzzsvqcrqtki6umym6itiixfhni37ybtt7mkbjyxn2pgllzxf2qgyd.onion/attachments/qwgindsoum-jpg.49445/

/u/fermentedshrimp P

1 points

2 months ago

this looks really impressive! Insane crystals indeed. I have so say that MG's gear also has this crystallization. I tried to mimic this, but haven't succeeded so far. I will check out this method. Thank you sir!

/u/harmreduction

1 points

2 months ago

Acetone won't remove the cutst. You will need Diethyl ether for that.

/u/jadelisterine2025

1 points

2 months ago

Yeah, diethyl ether is great stuff. Do you use it to wash the freebase before recrystallizing it into the hydrochloride, or do you just treat it like an acetone-style wash and leave it at that?

/u/harmreduction

1 points

2 months ago

It's for post wash to remove cuts.

/u/fermentedshrimp P

1 points

2 months ago

can you do both?

/u/harmreduction

1 points

2 months ago

Yes, if there is a reason why. Ether is highly explosive though.